BMX / INLINE / SKATE FACILITIES

an original A+ URBAN DESIGN product / TÜV certified and with GS mark

Our modular concrete skate elements were developed in the 1990s. They allow for a wide variety of combinations.

In 1999, the skate elements were TÜV certified and received the GS mark (tested safety). This made them arguably the first modular concrete skate elements with both the TÜV certificate and the GS mark worldwide.

The edge protection profile we introduced, which is installed on all edges of the skateable surfaces, has also proven itself and is still used today. In addition to providing protection, this allows the skate elements to be placed side by side with or without closed joints, creating narrow joints and preventing or significantly reducing the formation of cracks at the joints.

Our Combi-Pipe (pipe with bench) was installed in the ground for the first time at the 2000 State Garden Show in Memmingen. In 2002, the first bowl with our modular skate elements was built on Gran Canaria.

Our skate elements are used at altitudes from approximately 0 m to over 1000 m above sea level. They are used from the north in Norway to the south in the Canary Islands and from the east in Romania to the west in England.

CHARACTERISTICS OF OUR MODULAR CONCRETE SKATE ELEMENTS

• Modular skateboard elements made of concrete, versatile in heights of 45-60-75-98-125-149 cm, 125 cm grid (wall thickness 8 to 16 cm)
  
• Pipes made of reinforced concrete (concrete) H = 150 cm (Bowl), H = 185 cm (Bowl), H = 240 cm, H = 320 cm (grid 187.5 / 250 cm)
  
• TÜV certified skate elements with GS (tested safety) mark
  
• Weather-resistant materials (concrete, stainless steel, galvanized steel, hard rubber)
  
• Easy to set up; no foundations or ground fixings required; the surface remains undamaged (unlike with wood or steel structures)
  
• Suitable for earth installation and earth modelling
  
• Lockable feet for adjusting to uneven surfaces
  
• Easy assembly by placing them together using a pallet truck or forklift
  
• Low maintenance - no screwing or peeling of coating layers (which can lead to injuries)
  
• Lowest noise compared to other constructions (wood or metal)
  
• Non-slip driving surface due to absorbent surface (unsealed concrete surface) that does not become slippery when wet
  
• Hard rubber edge protection (embedded in concrete lengthwise) on all sides of the driving surface (including concave surfaces)
  
• Starting wedges made of stainless steel, cast in concrete (without screw connections), closed on the side
  
• Continuous galvanized coping tubes with aluminum caps (slide better and do not dent); stainless steel tubes also available on request
  
• Recesses in the lower area for pallet trucks or forklifts and for draining rainwater (no puddles forming at open angles of the combinations)
  
• Easy dismantling, conversion or extension of systems with pallet trucks (up to H = 100cm) or forklifts (up to H = 150cm)
  
• Suitable for skate, inline and BMX facilities
  
• A wide variety of combinations and recombining of the elements is possible due to their modular design
  
• The skate elements are designed according to DIN EN 14974 "Installations for users of roller sports equipment."
  
• Consulting and planning support with drawings
  
• 2D and 3D design of skate parks 
• An original A+ URBAN DESIGN skate equipment
  

TÜV SOUTH CERTIFICATE DATABASE:

TÜV Certificate (search term "Skateboardbahn"),

GS Characters (search term "Skate-Elemente")

TÜV TEST MARKS SET A SIGN FOR QUALITY
Certification provides visible proof that a product meets all relevant safety and quality requirements and exhibits the required product features. In addition to legally required testing and certification, manufacturers can also voluntarily have their products tested and certified for standards such as compliance with technical specifications. Voluntary testing and certification allows companies to differentiate their products from competitors and emphasize that they offer their customers and consumers only high-quality and safe products.
TÜV SÜD is recognized worldwide as one of the leading independent bodies for product certification. We test and certify a wide variety of products according to both legally required and voluntary standards. TÜV SÜD's signature certificati https://www.tuvsud.com/de-de/unsere-pruefzeichen on mark, our blue octagon, is highly recognizable and stands for quality and safety among professional buyers and consumers around the world.

SKATE CATALOGUE A+ 

BMX SKATE-ANLAGE  INLINE SKATEANLAGE SKATER-ANLAGEN BMX-ANLAGEN BMX-PARK STREET-ANLAGEN SKATE-ANLAGE SKATE ANLAGEN BMX SKATEANLAGE

ERATUNG, PLANUNG, MONTAGE UND BAU VON SKATEANLAGEN, SKATEPARK, BETON SKATEPARK, CONCRETE SKATE-PARK, SKATEPARKS,  BETON-SKATEELEMENTE, CONCRETE SKATE-ELEMENTS, BETON (CONCRETE) SKATEANLAGE,  SKATE-PARK,  SKATE-PARKS
SKATEPARK SKATEPARKS SKATE-PARK SKATE-PARKS SKATEPARK SKATEPARKS SKATE VERTRIEB SKATE ANGEBOT SKATEANLAGE SKATEANLAGEN SKATE-ANLAGE SKATE-ANLAGEN,S
HERSTELLUNG UND VERTRIEB VON SKATE-RAMPEN SKATE-RAMPS SKATERAMP SKATERAMPE SKATERAMPEN SKATERAMPS KATERAMPE SKATE-RAMP SKATE-RAMPE QUARTER-RAMP QUARTER-RAMPS QUARTER-RAMPE QUARTER-RAMPEN QUARTERRAMP QUARTERRAMPS QUARTERRAMPE QUARTERRAMPEN FUN-BOX OLLIEBOX FUNBOX PIPE PIPES OLLIE-BOX, RAIL, FLAT RAIL,BANK, BANK TO BANK, CURB, CURB CUT, LONDON-GAP, LEDGE,
JUMP-RAMP, JUMPRAMPS, CURB, CURB-CUT, CONCRETE BOWL, BOWL AUS BETONFERTIGTEILE, SKATE-POOL, CONCRETE POOL,  BANK, BANK TO BANK, MINIPIPE, RAIL, FLATRAIL, LEDGE, SPINE, WAVE, BETONTREPPEN, CONCRETE STAIRS, CORNER, PYRAMIDE, HALF-PYRAMID ,  Hersteller und Lieferant von Skate-Module, 3D Planung von Skate-Parks und BMX-Anlagen, nach DIN EN 14974, TÜV geprüft und TÜV Zertifiziert, mit GS Zeichen, FREIZEIT-EINRICHTUNGEN, SKATE-AUSSTATTUNGEN, BETON SKATE-MODULE, BERATUNG, 3D PLANUNG UND VERKAUF VON SKATE UND BMX-BIKE-ANLAGEN PLANEN; BAUEN;  KAUFEN